Cleanin provides commercial window cleaning across Sydney for office buildings, shopfronts, retail centres, strata properties, and high-rise glazing. Our trained and insured teams clean interior and exterior glass, facades, and skylights using water-fed pole systems and safe access methods, delivering streak-free results while working safely at height.
Commercial window cleaning keeps a building’s glazing clear, from ground-floor shopfronts to high-rise glass facades. Clean glass does more than look good: it lets in natural light, shapes the first impression customers and tenants form, and shows a building is well maintained. Cleanin cleans the interior and exterior glazing of offices, retail centres, strata buildings, and other commercial properties across Sydney.
The two things that decide how a window clean is done are the glass and the height. Streak-free results come from technique and, on exterior glass, purified or deionised water, which dries without leaving the mineral marks that tap water and detergents leave behind. Height decides the access method: ground-floor and low-level glazing is cleaned with poles and squeegees, mid-level with water-fed poles that reach from the ground, and high-rise facades with elevated work platforms or rope access. Matching the method to the building is what makes the work both safe and effective.
Because commercial window cleaning above ground level is work at height, it is planned around safety as much as results. Cleanin uses trained, insured teams, the right access method for each building, and site-specific safe work procedures, so your glazing is cleaned to a professional standard without putting people at risk or disrupting your operations.
Commercial window cleaning maintains the appearance, visibility, and professional presentation of commercial properties by cleaning internal and external glazing, customer-facing glass, and other glazed surfaces. Every window cleaning programme is tailored to your building type, glazing system, accessibility, operating hours, and maintenance requirements to deliver consistent results with minimal disruption.
Cleaning glass above footpaths and entrances means managing risks to people below the work area. Cleanin uses exclusion zones, barriers, and signage where required, and secures tools and equipment to reduce the risk of dropped objects. Work is also timed and managed to keep pedestrians, customers, and staff clear of the active work area.
The right access method depends on the building and the work involved. Where possible, Cleanin uses water-fed poles from the ground to avoid working at height. For areas that cannot be reached from the ground, Cleanin may use suitable elevated work platforms or other access systems, with trained and authorised operators where required. Industrial rope access is used where other access methods are not reasonably practicable and is planned with the appropriate fall-protection controls.
Working at height requires trained people as well as suitable equipment. Cleanin's window cleaning teams are trained in the equipment and access methods they use, insured, and police-checked. Where high-risk work equipment requires specific licensing, the appropriate licensed operators are used, so people with the required skills and authorisations carry out the work.
Cleaning windows above ground level can involve work at height, so the risks of falls must be properly assessed and controlled under the WHS Act 2011 (NSW) and the WHS Regulation 2017. Where the work is high-risk construction work, a site-specific SWMS is required before work begins. Cleanin identifies fall hazards, selects appropriate controls, and makes sure the required safety measures are in place before elevated work starts.
Compliance
Height is one of the main safety concerns in commercial window cleaning. Cleaning glazing above ground level requires careful planning around access, fall risks, equipment, and the people working below. Cleanin plans each job around these risks, using the most suitable access method, trained operators, and safety controls for the site.
Cleaning windows above ground level can involve work at height, so the risks of falls must be properly assessed and controlled under the WHS Act 2011 (NSW) and the WHS Regulation 2017. Where the work is high-risk construction work, a site-specific SWMS is required before work begins. Cleanin identifies fall hazards, selects appropriate controls, and makes sure the required safety measures are in place before elevated work starts.
The right access method depends on the building and the work involved. Where possible, Cleanin uses water-fed poles from the ground to avoid working at height. For areas that cannot be reached from the ground, Cleanin may use suitable elevated work platforms or other access systems, with trained and authorised operators where required. Industrial rope access is used where other access methods are not reasonably practicable and is planned with the appropriate fall-protection controls.
Cleaning glass above footpaths and entrances means managing risks to people below the work area. Cleanin uses exclusion zones, barriers, and signage where required, and secures tools and equipment to reduce the risk of dropped objects. Work is also timed and managed to keep pedestrians, customers, and staff clear of the active work area.
Working at height requires trained people as well as suitable equipment. Cleanin's window cleaning teams are trained in the equipment and access methods they use, insured, and police-checked. Where high-risk work equipment requires specific licensing, the appropriate licensed operators are used, so people with the required skills and authorisations carry out the work.
Window cleaning generally uses purified water and limited detergents, but any cleaning chemicals still need to be handled safely. Products are managed under documented procedures, with Safety Data Sheets (SDS) available where required, while wastewater and residues are handled responsibly. This keeps the cleaning process safe for workers, the building, and the surrounding site.
Commercial window cleaning comes down to two things: getting the glass genuinely clean and doing the work safely on an occupied building, often across multiple storeys. Cleanin focuses on both, with cleaning planned around your building and daily operations. Here is what that means.
Cleanin follows a structured five-stage process built around two decisions that shape every window clean: how to reach the glass safely and how to leave it clear and streak-free. Each stage is planned around your building’s height, glazing, access, and daily operations.
A Cleanin supervisor inspects the building to identify the glazing types, building height and layout, access points, potential hazards, and the condition and level of contamination on the glass. Understanding the height and available access helps determine the safest method and equipment for the job, so this assessment shapes everything that follows.
The access method is selected for each part of the building, using water-fed poles from the ground where practical, elevated work platforms for suitable areas, or rope access where required for high-rise glazing. The cleaning method is also planned at this stage, including the use of purified water for exterior glass where suitable. Any height-safety controls, exclusion zones, and dropped-object protection are planned before work begins.
Before work starts, the team coordinates timing around your trading, pedestrian, and vehicle movements, sets up exclusion zones below elevated work where required, and considers the weather conditions. Exterior window cleaning is best carried out when conditions allow the glass to dry cleanly, so weather is considered as part of the schedule. This helps protect both the people on site and the quality of the finished result.
Trained teams clean the glazing using the planned access method and cleaning technique, following the site’s safe work procedures for any work at height. Whether cleaning shopfronts, facades, or high-rise windows, each area is cleaned to a clear, streak-free standard while the work area remains controlled and safe.
Once the work is complete, the finished glass is inspected against the required standard and any areas needing attention are addressed. For buildings on a maintenance programme, cleaning frequency is set according to how quickly the glazing becomes soiled, helping exterior glass exposed to weather and pollution stay clear and presentable over time.
Request a quote
Call Cleanin on 1300 50 55 50 or complete the online quote form. Tell us your building type and address, the number of storeys, the type of glazing, such as shopfronts, facades, or high-rise windows, and any access considerations. This gives us enough information to plan the right inspection.
A Cleanin supervisor inspects your building to assess the glazing, building height, access conditions, level of contamination, and any safety requirements. Seeing the building helps determine the most suitable access method, whether that is a water-fed pole, EWP, rope access, or another appropriate system, as well as an accurate price.
The proposal is built around your building, covering the glazing to be cleaned, the access method for each area, the cleaning frequency if the service is ongoing, the relevant safety approach, and the price. You get a clear plan showing what will be cleaned and how before you commit.
Once you approve the proposal, the work is scheduled around your operations and suitable weather conditions, whether that means before opening, after hours, or during quieter periods. Any elevated work is planned with the required safety controls in place. There is no lock-in contract, so you can arrange a one-off clean or an ongoing maintenance programme.
